記憶體 RAM | Acer 專用記憶體 | Altos RAM | Acer Altos R520 專用記憶體

Acer Altos R520 專用記憶體 | 請選擇喜歡的升級模組

 
1gb ECC Fully Buffered (Shld) Acer專用模組 (UAC1377) @ HK$363 有現貨
2gb ECC Fully Buffered (Shld) Acer專用模組 (UAC1378) @ HK$450 請查詢
4gb ECC Fully Buffered (Shld) Acer專用模組 (UAC1379) @ HK$1131 有現貨

 

我們堅持採用高品質的原廠顆粒,例如 Samsung, Hynix, Infineon, Swissbit, Princeton and Micron等。 我們模組品質有如各大名廠例宏碁,蘋果,戴爾,惠普,聯想,東芝等。

Upgradeable代理的記憶體模組全帶終身保固。每張訂單的項目都經專人手檢查以確保相容性更多關於Upgradeable的購買保證.


配備細節

安裝注意

內裡固定記憶體: 0MB
插槽1: 512MB
內裡固定+預設記憶體: 512MB

可升級至: 16GB

記憶體插槽總計: 8
排列: 4 組 x 2 個插槽
  • Order and install in pairs.
  • The system must have a minimum of one 512MB FBDIMMs installed. Memory must be installed in pairs if more than one module is installed. When installing additional memory, memory must be installed in the proper population order.
  • Memory order is:
  • DIMM A1 is the only slot that can have a single module installed.
  • Memory must be installed in identical pairs in the following sequence:
  • DIMM A1 and DIMM B1
  • DIMM A2 and DIMM B2
  • DIMM C1 and DIMM D1
  • DIMM C2 and DIMM D2
  • See system manual for detail memory installation. Summarised as:
  • 1. Observe the ESD precautions and pre-installation instructions as per system manual.
  • 2. Remove the CPU air duct.
  • 3. Locate the DIMM slots on the mainboard.
  • 4. Open the clips on the DIMM slot(s).
  • 5. Align then insert the DIMM into the socket.
  • 6. Press the holding clips inward to lock the DIMM in place .

搜索



購物車

購物籃是空的

查看購物籃和結帳

 

電郵地址:

密碼:

註冊 / 取回密碼