|
|
Acer Altos G530 專用記憶體 | 請選擇喜歡的套裝升級模組
我們堅持採用高品質的原廠顆粒,例如 Samsung, Hynix, Infineon, Swissbit, Princeton and Micron等。 我們模組品質有如各大名廠例宏碁,蘋果,戴爾,惠普,聯想,東芝等。
Upgradeable代理的記憶體模組全帶終身保固。每張訂單的項目都經專人手檢查以確保相容性更多關於Upgradeable的購買保證.
配備細節 | 安裝注意 | 內裡固定記憶體: 0MB
插槽1: 512MB
內裡固定+預設記憶體: 512MB
可升級至: 8GB
記憶體插槽總計: 4
排列: 2 組 x 2 個插槽
| - Single rank or Dual rank memory is not an issue in this system because there is only four memory slots.
- The minimum memory configuration is one DIMM, installed in the DIMM 1B socket (the socket farthest from the CPU sockets). However, for optimum performance and dual-channel interleave operation, a minimum of two DIMMs should be installed. DIMMs on channel A (DIMM 1A and 2A) are paired with DIMMs on channel B (DIMM 1B and 2B) to enable 2-way interleaving.
- Populate both DIMMs in bank 1 (DIMM 1B and 1A) first, before populating DIMMs in bank 2 (DIMM 2B and 2A). Bank 2 must be populated in pairs.
- For the system to function, DIMM modules must be installed or removed in matched pairs, following the socket sequence :DIMM 1B and 1A first, then DIMM 2B and 2A. DIMM modules of the same type, banking, stacking technology, and manufacturer must be installed in the Altos G530 system.
- Altos G530 supports memory sparing function. To provide a more fault tolerant system, Altos G530 includes special hardware to support fail-over to a spare DIMM device in the event that a primary DIMM in use exceeds a specified threshold of runtime errors. One of the DIMMs installed per channel will not be used, but kept in reserve. In the event of significant failures in a particular DIMM, it and its corresponding partner in the other channel (if applicable), will, over time, have its data copied over to the spare DIMM held in reserve. When all the data has been copied, the reserved DIMM will be put into service and the failed DIMM will be removed from service. Only one sparing cycle is supported. If the memory sparing feature is not enabled, then all DIMMs will be visible in normal address space. Refer to Memory Configuration on page 101 for more information about configuring the memory spare parameter in the BIOS Setup Utility.
|
|
|
All Makes